HYPACK
  • Data Collection and processing: Single Beam, Multibeam, Side Scan Sonar, etc.
  • Full Navigation with AIS Integration
  • S57 Chart Update and Real-Time Verification
  • Real-time 3D Terrain Model with AVI recording.
  • Real-time Altitude for Keel Clearance
  • Reports: Sections, Volumes, TIN Models, Plots, Side Scan Mosaic
HYSWEEP
  • Multibeam Data Collection/Editing Module
  • Real-time imaging, targeting, QC.
  • Powerful Graphical/Automated Editing
  • CUBE data Processing
  • Patch Test Calibration
  • Performance and Statistical Reports
DREDGEPACK
  • Full Navigational and Dredging support
  • Cutter Suction, Hopper, Excavator, and Clamshell Application
  • Digging Efficiency
  • Precise Dredge Positioning
  • DTM with Volumes and Reports
  • OPC compliant and PLC interface capable
  • Meets USACE Silent Inspector Requirements
  • Turn-key system available.

Welcome

HYPACK - A Xylem Brand and now part of YSI is a Windows based software for the Hydrographic and Dredging Industry. Founded in 1984, HYPACK, INC (formerly Coastal Oceanographics, Inc.) has evolved from a small hydrographic consultant to one of the most successful providers of hydrographic and navigation software worldwide. HYPACK® is one of the most widely used hydrographic surveying packages in the world, with more than 10,000 users. It provides the Surveyor with all the tools needed to design their survey, collect data, process it, reduce it, and generate final products. Whether you are collecting hydrographic survey data or environmental data, or just positioning your vessel in an engineering project, HYPACK® provides the tools needed to complete your job. With users spanning the range from small vessel with just a GPS and single beam echosounder to large survey ships with networked sensors and systems, HYPACK® gives you the power needed to complete your task in a system your surveyors can master.

Announcements

WEBINAR: HYPACK® Sub-bottom Profiling Software

“Beneath the Seafloor: Exploring HYPACK® Sub-bottom Profiling Software”

DATE: May 25th, 2017

TIME: 11:00AM – 11:45AM EDT

REGISTER HERE!

Follow Dr. Peter Ramsay as he guides you through HYPACK’s new, simple and easy to use solution for sub-bottom profiling. This single-channel or dual-channel system is used for shallow reflection seismic profiling and is a powerful tool in many common applications, including offshore, coastal and port engineering and geotechnical site surveys, renewable energy surveys, dredging studies, mineral exploration and habitat mapping projects. The interpreted data from these systems includes the thickness and qualitative sediment characteristics of the different sediment layers that comprise the sub-bottom strata.

Webinar highlights include:

• See how you can expertly process & interpret your sub-bottom profiling data in a 2D & 3D environment using HYPACK Sub-bottom.

•  Demonstration & tips on acquiring high quality sub-bottom profiling data to ensure project success.

•  Introduction & explanation on how to interface to your sub-bottom profiling system.



 

Did you miss the NEXUS 800 Webinar??

Did you miss the webinar? No problem! The presentation was recorded for future viewing

VIEW THE WEBINAR - CLICK HERE!

Learn how this complete and innovative mapping solution will take aerial surveying to the next level! The NEXUS 800 powered by HYPACK® is a full end-to-end solution that represents a new paradigm in Unmanned Aerial Vehicle (UAV) data collection by seamlessly harmonizing LiDAR data with photogrammetry. This system provides a seamless solution for aerial mission planning, data acquisition, post processing and product creation.

Webinar highlights include:

• Leverage multiple sensors all on one platform - use the NEXUS to collect your LiDAR with your photogrammetry or thermal at the same time.

• See the LiDAR and photogrammetric data live in real time - empower your UAV  operations with real time data quality assurance and quality control.

Know before you land.

• Acquire, post process, and deliver your data products all within HYPACK -
turn your data into information quickly! 


 

 

Ustream Videos Available from HYPACK 2017!

Did you miss some of the training sessions at HYPACK 2017?

Don't worry because you can still view them on our Ustream account. All of the training presentations from the all three rooms at the HYPACK 2017 Training Event are uploaded to ustream.tv providing viewers with over 30 hours of HYPACK® training.

There are 39 hours of training from hypack 2017 listed at: http://www.ustream.tv/channel/hypack

  

 

SOME OF THE TRAININGS INCLUDE:

-              Harold welcoming everyone to the conference and premiering the new HYPACK 2017 features

-              Introduction of the new 64-bit Single Beam Editor, “SBMax64”, by programmer Mike Kalmbach

-              Complete Multibeam hardware configuration, HYSWEEP survey and MBMax64 editing seminars

-              LiDar data processing with Dave Maddock

-              Five hours of Dredgepack instruction

-              Side scan configuration, survey, and targeting and mosaicking

-              Demonstration of processing tools and creation of final products

-              Joint sessions with HYPACK and ISS (ViPer software) and SonTek (M9 sonar and CastAway CTD) Tech Support.  

 

NEW Integration - ViPer Software

We are pleased to announce the release of YSI Integrated Systems and Services vertical profiler ViPer software for visualization of environmental data.

This newly released software, powered by HYPACK, facilitates the visualization of data acquired by the vertical profiler in linear and gradient graphs, as well as spreadsheet views. You can learn more HERE.

To download the installer CLICK HERE to go to our product page!

 

 

SurvTech Solutions, Inc. selects the NEXUS 800 as their Aerial Mapping Solution

The next evolution in Unmanned Aerial Mapping 

SurvTech Solutions, Inc. selects the NEXUS 800 as their Aerial Mapping Solution

NEXUS 800 powered by HYPACK provided to southeastern geospatial solutions company: When asked why SurvTech chose the HYPACK Solution, President David O’Brien said the answer is simple.


“Our goal was to acquire upland data simultaneous with subaqueous data and make a seamless point cloud of upland and submerged data. The integration of the Puck with our heading RTK GPS, IMU and sonar was extremely straightforward and HYPACK was there every step of the way. Since that integration, we have been collecting mobile LiDAR with the HYPACK solution from our boats and trucks and are extremely happy with the datasets.”

On HYPACK Tech Support:“Anytime we have an issue, HYPACK tech support is just one phone call away. So HYPACK is already our solution for mobile LiDAR acquisition, so it makes complete sense to stay with the solution that works when moving to the UAV platform” –David O’Brien, President of SurvTech Solutions, Inc.

Survey Tech Solutions Logo

Why did you choose the NEXUS 800?

“When planning to equip a UAV copter with the Puck sensor, heading RTK GPS, IMU and computer processing board, we realized we would need a commercial grade copter that would be extremely robust and have built in redundancy. When estimating the cost of purchasing the components, including an onboard computer and software that would integrate the LiDAR and position data, we found the NEXUS to be the right solution, based on familiarity with system, quality, price and HYPACK’s technical support. We would be utilizing a mobile LiDAR solution that we were already familiar with, and leave the UAV construction and integration to the experts at HYPACK. All those reasons, combined with their phenomenal tech support would simplify the transition of mobile LiDAR to the UAV platform for SurvTech.” - David O’Brien, President of SurvTech Solutions, Inc.  
For a complete list of Trade Shows, Seminars and Conferences, please Click here.